Siemens WG56G2MAFG User Manual And Installation Instructions Download

Page: 40 / 56

NL Troubleshooting

Malfunction

"E:36 / -10"

Cause and Troubleshooting

▶

Remove unauthorized extensions from the water

drain hose. Connect device

Pump cover is not fully screwed in.

▶

Make sure that the pump cover is screwed into the

device as far as it will go. The pump cover handle

must be vertical.

"E:38 / -25 / -26"

Drain pump is clogged.

▶

→

"Cleaning the drum", page 35

if the fault is displayed again,

▶

→

"Cleaning the drain pump", page 36

Inlet opening of the rubber sleeve is clogged.

▶

→

"Clean the inlet opening in the rubber sleeve",

page 38

"E:60 / -2B"

The unbalance detection system has interrupted the

spin cycle due to uneven distribution of the laundry.

▶

Redistribute the laundry in the drum.

Remark: If possible, place large and small items of

laundry together in the drum. Different sized laundry

is more evenly distributed during the spin cycle.

Water pressure is low.

No solution possible.

The strainers in the water supply are clogged.

▶

Clean the strainers in the water supply.

Water tap is closed.

▶

Open the water tap.

Water supply hose is kinked or pinched.

▶

Make sure that the water supply hose is not

kinked or pinched.

Water level measuring system defective.

▶

Please contact customer service.

→

"Customer Service", page 49

burns.

Temperature is too high.

▶

Wait for the temperature to drop.

▶

→

"program cancel", Page 33

Water level is too high.

▶

Select a suitable program for draining.

→

"Programs", Page 26

Summary of Contents for WG56G2MAFG

























































Search results

Summary of Contents for WG56G2MAFG

Reviews:

Related manuals for WG56G2MAFG

Brands by name

Popular brands

Siemens WG56G2MAFG, User Manual And Installation Instructions

Search results

Summary of Contents for WG56G2MAFG

Reviews:

Related manuals for WG56G2MAFG

Brands by name

Popular brands