Service NL
3.
Fold the dosing aid downwards and
click into place.
a The display shows whether the program
maduur or the ready in time
displayed.
a After the program end, it shows
display: "-0-".
13.9 Soaking laundry
Remark: No additional detergent is
needed. The soapy water is then used
for washing.
1.
Start the program.
2.
To pause the program, after about
10 minutes, press Start/Pause.
4.
Slide in the detergent drawer.
13.7 Dosing detergent and care
agent
3.
To resume the program after the
desired soaking time, pressStart/
Pause.
Remarks
sex Use the dosing aid for liquid
Do not use with gel-like detergents,
washing powder, switched on
prewash or ready-in time.sex Keep
the directions for washing
13.10 Adding laundry
1.
Press Start/Pause.The
device pauses.
Remark: When
it is not possible to add laundry.
appears
1.
Pull out the detergent drawer.
When
laundry possible.
goes out, then the refill
2.
Fill with detergent.
2.
Open the appliance door.
3.
Reload or remove the laundry.
4.
Close the appliance door.
5.
Press Start/Pause.
3.
If desired, fill with a care product.
4.
Slide the detergent drawer into the
appliance.
13.11 Program Cancel
13.8 Starting the program
1.
on Start/Pause to press.
2.
Open the appliance door.
Remark: If you want to change the
time until the program end, first set
the ready in time.
At high temperature and high
water level, the appliance door
remains locked for safety reasons.
– Start the program at a high
temperature To rinse.
▶
on Start/Pause to press.
a The drum rotates and a
load recognition takes place, which
can take up to 2 minutes, after
which the water flows into the
device.
33
