Siemens WG44G20BDN User Manual And Installation Instructions Download

Page: 39 / 52

Troubleshooting

Fault

Cause and troubleshooting

flashes.

Voltage under-usage may cause extension of a pro-
gramme.
No remedial action possible.

⁠ lights up.

The temperature is too high.

▶

Wait until the temperature has dropped.

▶

→

"Cancelling the programme", Page 31

Water level is too high.

▶

Select a suitable programme for draining.
→

"Programmes", Page 24

⁠ flashes.

Door is not closed.

Close the door.

Press

⁠ to start the programme.

Laundry is caught in the door.

Open the door again.

Remove any trapped laundry.

Close the door.

Press

⁠ to start the programme.

All other error codes.

Malfunction

▶

Call the after-sales service.
→

"Customer Service", Page 47

"E:30/-20"

Solenoid valve defective.

▶

Call the after-sales service.
→

"Customer Service", Page 47

Detergent dosage is too high.

▶

Reduce the amount of detergent for the next wash-
ing cycle with the same load.

Additional water is added.

▶

Do not add any extra water to the appliance while it
is operating.

The appliance is not
working.

The mains plug of the power cord is not plugged in.

▶

Connect the appliance to the power supply.

The circuit breaker in the fuse box has tripped.

▶

Check the circuit breaker in the fuse box.

There has been a power cut.

▶

Check whether the lighting in your kitchen or other
appliances are working.

The programme does
not start.

You have not pressed

⁠ .

▶

Press

⁠ .

Door is not closed.

Summary of Contents for WG44G20BDN





















































Search results

Summary of Contents for WG44G20BDN

Reviews:

Related manuals for WG44G20BDN

Brands by name

Popular brands

Siemens WG44G20BDN, User Manual And Installation Instructions

Search results

Summary of Contents for WG44G20BDN

Reviews:

Related manuals for WG44G20BDN

Brands by name

Popular brands