Siemens WFC3 Series, Mounting Instructions, Page: 10 / 60

10 CE1M5328xx 19.03.2015 Siemens Building Technologies
eN
Safety and warranty
This product must be installed professionally and in ac-
cordance with the prescribed assembly guidelines
and may therefore only be installed by qualified and
trained experts.
Application according to specification
Water meters are for the centralized recording of the con-
sumption of heat energy or cooling energy. Depending on
their design, they are for measuring hot water or hot water
with glycol additives. Heat meters must be used exclusively
for this purpose.
Any use other than the use described previously and any
changes made to the device constitute improper use. Uses
and changes must be queried in writing beforehand and are
subject to special approval.
Warranty and guarantee
Warranty and guarantee claims are only valid if the parts in
question have been used in accordance with their intended
use and if the technical requirements and any applicable
technical regulations have been observed.
Safety notes
The devices may only be used in technical building instal-
lations and only for the applications described. The device
has been designed in accordance with the guidelines of Pro-
tection Class III and must be mounted in compliance with
these regulations. Local regulations (installation etc.) must
be heeded.
Safety notes for lithium batteries
The electronic water meter is equipped with a lithium battery.
This type of battery is classified as hazardous.
VALID TRANSPORT REGULATIONS ARE TO BE ADHE-
RED TO IN EACH CASE!