en
Operating the appliance
40
}
(Remote start)
Touching
}
(Remote start) allows you
to start the programme remotely via the
Home Connect app or to call up the
Home Connect settings.
Enabling the programme to be started
remotely via the Home Connect app:
Note:
Remote start can only be
activated if the appliance door is closed
and the appliance is connected to your
home network.
■
Briefly touch
}
(Remote start).
Note:
Remote start will be
deactivated for safety reasons in the
following circumstances:
You open the door.
There is a power failure.
Once the programme has ended.
If you touch
I
on the appliance.
If you briefly touch
}
(Remote
start) again.
If you press
#
to switch off the
appliance.
Calling up Home Connect settings:
■
Touch and hold
}
(Remote start) for
at least 3 seconds.
1
Operating the
appliance
Operating the appliance
Preparing the appliance
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
k
Drum Clean
programme.
"Before washing for the first time"
Notes
■
Never switch on a damaged
appliance!
■
Inform customer service!
1.
Insert mains plug.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
2.
Turn the water tap on.
3.
Open the appliance door.
Switching on the appliance/
selecting a programme
Press the
#
button till the indicator
lamp lights up, release the button. The
appliance is switched on.
The
v
Cottons
programme (only
washing), which is preset at the factory,
is then always displayed.
You can use this programme or select a
different programme.
