Operating the appliance
en
45
Cancel the programme
For programmes washing at high
temperatures:
1.
Touch the
I
button.
2.
To cool down laundry: Select
q
Rinse
.
3.
Touch the
I
button.
For programmes washing at low
temperatures:
1.
Touch the
I
button.
2.
Select
0
Spin
.
3.
Touch the
I
button.
For programmes in drying process:
1.
Switch the appliance off.
2.
Switch the appliance on again.
3.
To cool down laundry: Select the
\
myTime
+
dry
.
4.
Touch the
I
button.
Programme end
End
lights up on the Touch-Display and
I
and
Õ
displays are off.
If you have selected
2
, the water is only
drained after rinse process, no spin
cycle.
Notes
■
If
Hot
flashes in the display before
the drying programme ends, the
temperature in the drum is high. The
programme for cooling the drum
runs until the temperature in the
drum has dropped.
■
Wrinkle guard process starts after
drying process is finished to prevent
laundry getting wrinkle if you do not
take laundry out in time. The process
lasts about 30 minutes.
˜—à•
,
£©
,
and
“Ÿš
will be displayed alternately
on Touch-Display and
Ó
symbol will
be displayed as the status symbol.
You can touch any area of Touch-
Display to terminate this process,
then the door will be released and
laundry can be taken out.
Removing laundry/switching
off the appliance
1.
Press the
#
button till the indicator
lamp turns off, release the button.
The appliance is switched off.
2.
Open the door and remove the
laundry.
3.
Turn off the water tap.
Note:
Not required for Aqua-Stop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Wipe the rubber seal dry.
■
Leave the door and detergent
drawer open so that any residual
water can evaporate.
■
Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
