background image

Safety instructions    

en

5

(

Safety instructions

Safety instructions

The following safety information 

and warnings are provided to 

protect you from injury and to 

prevent material damage to 

your surroundings.
It is nevertheless important to 

take the necessary precautions 

and to proceed with care when 

installing, maintaining, cleaning 

and operating the appliance.

Children/people/pets

:

Warning

Risk of death!

Children and other people who 

are unable to assess the risks 

involved when using the 

appliance may injure 

themselves or may find 

themselves in life-threatening 

situations. Therefore please 

note:

The appliance may be used 

by children over the age of 8 

years and by persons with 

reduced physical, sensory or 

mental capacity or by 

persons with a lack of 

experience or knowledge as 

long as they are supervised 

or have received instruction 

on how to use the appliance 

safely and they have 

understood the potential 

risks of using the appliance.

Children must not play with 

this appliance.

Do not allow children to 

clean or maintain this 

appliance unsupervised.

Keep children under 3 years 

and pets away from this 

appliance.

Do not leave the appliance 

unattended when children or 

other people who are unable 

to assess the risks are in the 

vicinity.

:

Warning

Risk of death!

Children may lock themselves 

inside appliances and find 

themselves in a life-threatening 

situation.

Do not position the 

appliance behind a door, as 

this may obstruct the 

appliance door or prevent it 

from opening completely.

Once an appliance has 

reached the end of its life, 

pull the mains plug from the 

socket 

before

 severing the 

mains cable, and then 

destroy the lock on the 

appliance door.

:

Warning

Risk of suffocation!

If allowed to play with the 

packaging/plastic film or 

packing components, children 

may become caught in these or 

pull them over their heads and 

suffocate. 

Keep packaging, plastic film 

and packing components away 

from children.

Summary of Contents for WD15G422GB

















































Reviews: