en
Basic operation
40
13.2 Setting a programme
1.
Set the programme selector to the
required programme.
→
2.
If necessary, adjust the pro-
gramme settings →
13.3 Adjusting the pro-
gramme settings
Requirement:
A programme has
been set.
→
"Setting a programme", Page 40
▶
Adjust the programme settings.
→
Please follow the information about
operating logic.
Notes
¡
The programme settings are not
saved permanently for the pro-
gramme.
¡
The setting is saved if you activate
or deactivate the intelligent dosing
system.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡
A programme has been set.
¡
The programme settings have
been adjusted.
▶
Press and hold for approx. 3
seconds.
Press to call up the saved pro-
gramme.
Note:
To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Notes
¡
Please read the information in the
Safety →
sec-
tions to ensure that you use the
appliance safely.
¡
To prevent creasing, take note of
the maximum load for the
→
.
Requirement:
The laundry is pre-
pared and sorted.
→
1.
Open the door.
Make sure that the drum is empty.
2.
Load the laundry unfolded into the
drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
Summary of Contents for WA14LQHVZA
Page 20: ...en Familiarising yourself with your appliance 20 1 2 ...
Page 71: ......