Unrestricted
17
©
2019 Siemens Industry, Inc.
814205 Rev02
Once the unit is powered on, and the SIM card is out of the inventory mode, verify the Green
Modem LED and Green SIM LED #1 are on steadily, not blinking, to confirm that the cellular
network is working effectively. Do not replace the SIM card in the unit, as it has been set up
specifically for the applications needed to manage VersiCharge implementations.
5.4 Wi-Fi
The WLAN (Wireless Local Area Network) credentials SSID (Service Set Identifier) and
password) are printed and sent with the VersiComm. If this document is lost, please contact
customer support at 1-800-333-7421. After you are confirmed to be the owner of the
VersiComm, the credentials will be given to you.
Once the charger is online, as seen above, and there is a good signal designated by 2 green
LED’s, confirm the Wi-Fi connection as follows:
1. To verify the network is functioning correctly, and to verify the network has internet access,
connect a Wi-Fi enabled device (i.e., cell phone or computer) to the access point.
If the user wishes to view any of the default settings configured for the IR915L, enter the default
IP address https://192.168.2.1 into a web browser, using a device that is connected to the
VersiComm router. When connecting, please ignore security warnings. The username and
password for the web-based management tools are provided with VersiComm documents
including the WLAN credentials. If this sheet is lost, please follow the customer support
information above to retrieve the username and password.
2. if you do not want to log on using a Wi-Fi enabled device test the internet connection by
logging into the web portal using the credentials on the document sent with the VersiComm.
Once you have logged on, scroll over to Tools on the left side, and click on Ping. This can be
seen in the picture below.
Serial
Number