Siemens TQ5 Series, User Manual

Page: 31 / 260

Cleaning and servicing en
31
1.
Press ⁠.
2.
Use and to select "Cleaning
and care" and press ⁠.
3.
Use and to select
"calc'nClean" and press ⁠.
4.
To start the programme, press ⁠.
a
The display will guide you through
the programme.
5.
Empty and insert the drip tray.
6.
Remove and empty the milk con-
tainer.
7.
Clean the milk container, milk tube
and suction pipe.
8.
Fit the components and insert the
milk container.
9.
If there is a water filter, remove it.
10.
Press ⁠.
11.
Empty the water tank.
12.
Fill a container with 0.5 l lukewarm
water.
13.
Add a Siemens descaling tablet to
the water and stir until the tablet is
fully dissolved.
14.
Pour the descaling solution into the
water tank up to the calc mark and
press ⁠.
15.
Place the empty container under the
outlet system and press ⁠.
a
The descaling programme will run
for approx. 20 minutes.
16.
Rinse the water tank.
17.
Press ⁠.
18.
If there is a water filter, insert the wa-
ter filter.
→
"Insert water filter", Page 22
19.
Press ⁠.
20.
Fill the tank with fresh water up to
the "max" mark.
21.
Press ⁠.
a
The programme takes ap-
prox. 1 minute and rinses the appli-
ance.
22.
Empty and insert the drip tray.
23.
Open the ground coffee compart-
ment.
24.
Place one Siemens cleaning tablet
into the ground coffee compartment.
25.
Close the ground coffee compart-
ment and press ⁠.
26.
Place a container with a capacity of
min. 0.5 l under the outlet system
and press ⁠.
a
The cleaning programme takes ap-
prox. 7 minutes.
27.
Empty and insert the drip tray.
28.
Remove and empty the milk con-
tainer.
29.
Clean the milk container, milk tube
and suction pipe.
30.
Fit the components and insert the
milk container.
a
The program has ended and the ap-
pliance is ready for operation.