13
Installation Guide / User Manual
| TPS4-01 Surge Protection Device
About Screen
The About Screen displays the manufacturer’s information, the model number
and the serial numberfor this specific SPD. Pressing the CENTER button will
return you to the Main Menu Screen.
System Info Screen
The System Screen displays the important electrical information for this system.
This includes the nominal operating voltage, System configuration (ie. Wye,
Delta, Single Phase) and maximum current rating for each mode of the SPD. The
processor serial number, firmware edition, build and test dates are also shown
on this page. Pressing the CENTER button will return you to the Main Menu
Screen.
System Memory Screen
The System Memory Screen displays the current state of the electronic
memory for this system. This includes the nominal operating voltage, System
configuration (ie. Wye, Delta, Single Phase) and maximum current rating for
each mode of the SPD. The processor serial number, firmware edition, build and
test dates are also shown on this page. Pressing the CENTER button will return
you to the Main Menu Screen.
Surge Event Screen
When the SPD detects a surge event this animation will be shown. It will remain
on screen until acknowledged by an operator. Any subsequent events that occur
while the Surge event animation is on screen will be registered and queued for
acknowledgment. Along with displaying the Surge animation, the Audio alarm
will sound. Pressing the CENTER button will acknowledge the event and clear
the alarm state. The Main Screen will be showing the details for the surge.
System Event Alarms
Temporary Over Voltage Event
When the SPD detects a Temporary Over Voltage Event (TOV) this animation
will be shown. It will remain on screen until acknowledged by an operator. Any
subsequent events that occur while the TOV event animation is on screen will
be registered and queued for acknowledgment. Along with displaying the
TOV animation, the Audio alarm will sound. Pressing the CENTER button will
acknowledge the event and clear the alarm state. The Main Screen will be
showing the details for the TOV.
The SPD may be exposed to a TOV for several minutes. On rare occasions a TOV
can exist for hours. The TOV animation will be displayed as soon as a TOV has
been detected. If an operator is able to acknowledge the event while a TOV
condition still exists, the screen below will be displayed.
