Application Manual
Nr. 02
Hotel rooms – room automation
Synco™
& Gamma
16
Fan coil unit with radiator in the bathroom, sun protection, presence-
dependent switching off of lighting and power supply
Features
·
Individual room temperature control, heating and cooling
·
2 control loops for room and bathroom
·
Automatic or manual fan control, 1- or 3-speed
·
Automatic or manual changeover of heating/cooling mode
·
Window contact – central detection of open windows
·
Detection of presence via hotel card switch
·
Presence- and time-dependent control of HVAC, lighting, sun protection, and power
supply to the room
·
Dimming and switching of lighting
·
Operation of HVAC
·
Simple and flexible installation thanks to wireless technology
·
Pushbuttons for "SOS", "Make up room", and "Do not disturb"
·
Demand-compensated production of heat and cooling energy thanks to automatic data
exchange with primary plant
Room setup
1.
QAX98.4 solar room unit:
The QAX98.4 acquires the room temperature. The 2 knobs are used to
adjust the room temperature setpoint and to select the operating mode (present/absent).
2.
RXB21.1 room controller:
The RXB21.1 controls the room temperature via the fan coil unit. It
receives the setpoint information from the room unit.
3.
AQR2532 room sensor with AQR2570 basic module:
The AQR acquires and controls the room
temperature in the bathroom via the radiator.
4.
AP 562/02 valve actuator:
The AP 562/02 drives the radiator valve in the bathroom. It receives the
positioning signal from the AQR controller.
5.
AP 641 room control box:
The AP 641 features 8 sockets for room automation modules type RS or
RL.
6.
RS 525/23 universal dimmer:
The RS 525/23 features a relay contact to dim a lighting group up to
Summary of Contents for Synco-Gamma
Page 1: ...www siemens com bt integrated applications Synco Gamma Application Guide Hotel buildings ...
Page 2: ......
Page 62: ......