Application Manual
Nr. 01
Hotel rooms – room automation
Synco™
& Gamma
11
Fan coil unit with radiator in the bathroom, sun protection, presence-
dependent switching off of lighting and power supply
Features
·
Individual room temperature control, heating and cooling
·
One control loop for the room and the bathroom
·
Automatic or manual fan control, 1- or 3-speed
·
Automatic or manual changeover of heating/cooling mode
·
Window contact – central detection of open windows
·
Detection of presence via hotel card switch
·
Presence- and time-dependent control of HVAC, lighting, sun protection, and power
supply to the room
·
Dimming and switching of lighting
·
Operation and display of HVAC
·
Simple and flexible installation thanks to wireless technology
·
Pushbuttons for "SOS", "Make up room", and "Do not disturb"
·
Demand-compensated production of heat and cooling energy thanks to automatic data
exchange with primary plant
Room setup
1.
Room thermostat RDF600KN:
The RDF600KN acquires the room temperature and controls the fan coil
unit and the radiator in the bathroom accordingly. The room operating mode can be selected and the
temperature setpoints can be adjusted on the room thermostat.
2.
STA23 electrothermal actuator:
The STA23 adjusts the valve according to the positioning signal it
receives from the controller.
3.
AP 641 room control box:
The AP 641 features 8 sockets for room automation modules type RS or RL.
4.
RS 525/23 universal dimmer:
The RS 525/23 features a relay contact to dim a lighting group up to 250
VA.
5.
RL 521/23 blind actuator:
The RL 521/23 features 2 relay contacts to control blinds.
6.
RS 510/23 binary output, 2-fold:
The RS 510/23 features 2 relay contacts to switch electric circuits.
7.
RXZ97.1 gateway EnOcean/KNX:
The RXZ97.1 converts EnOcean wireless signals from the wall trans-
mitter to KNX telegrams.
Summary of Contents for Synco-Gamma
Page 1: ...www siemens com bt integrated applications Synco Gamma Application Guide Hotel buildings ...
Page 2: ......
Page 62: ......
