Read parameters
●
Bin1
/
Bin2
(function of BE1/BE2)
●
MV_OpScale
.
Low
/.
High
(manipulated variable limit start/end)
●
AlarmFct
(alarm function)
●
AlarmLim1/2
(trigger threshold Alarm 1/2)
●
Tim
/
QTim
(monitoring time fault message 'Control deviation')
●
Lim
/
QLim
(response threshold fault message 'Control deviation')
Written parameters
●
Tim
(monitoring time fault message 'Control deviation')
●
Lim
(response threshold fault message 'Control deviation')
Opening additional faceplates
This block provides the standard "Call further faceplates" function that is described in the APL
Online Help.
Interlocks
This block provides the following interlocks:
● Activation enable ("Permission")
● Interlock without reset ("Interlock")
● Interlock with reset ("Protection")
Refer to the "Interlocks" and "Influence of the signal status on the interlock" sections in the APL
Online Help.
Resetting the block in case of interlocks or errors
This block provides the standard "Resetting the block in case of interlocks or errors" function
that is described in the APL Online Help.
Group error
This block provides the standard "Output group error" function that is described in the APL
Online Help.
The following parameters are taken into consideration when forming the group error:
●
CSF
●
MonDynErr
●
MonStaErr
●
MonDynAuxVErr
●
MonStaAuxVErr
SIPART PS2 HART
7.1 SipPS2HA
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
199
Summary of Contents for SITRANS PCS 7
Page 12: ...Table of contents SITRANS Library for PCS 7 12 Function Manual 05 2019 A5E35351976 11 ...
Page 418: ...SITRANS P 10 2 SitraPDr SITRANS Library for PCS 7 418 Function Manual 05 2019 A5E35351976 11 ...
Page 850: ...Index SITRANS Library for PCS 7 850 Function Manual 05 2019 A5E35351976 11 ...