Siemens SITRANS MAG 5100W Operating Instructions Manual Download Page 12

Page: 12 / 65

Safety notes

2.3 Certificates

Hazardous area approvals

The device is approved for use in hazardous area and has the following approvals:
●

MAG 5100 W DN 15 ... 1200: FM / CSA Class I, Div. 2

WARNING

Make sure the hazardous area approval is suitable for the environment in which the

device will be installed.

WARNING

All approvals are based on non-flammable processes only!

WARNING

Potential equalization
In operation, the output is earthed through the conductive medium being measured and

therefore potential equalisation is necessary throughout the hazardous area.
The apparatus housing shall be connected to the potential equalising conductor in the

hazardous area.

WARNING

Laying of cables
Cables for use in hazardous area must satisfy the requirements for having a proof

voltage < AC 500 V applied between the conductor/ground, conductor/shield and

shield/ground.
Connect the devices that are operated in hazardous areas as per the stipulations

applicable in the country of operation.

2.3

Certificates

Certificates are posted on the Internet and on the documentation CD-ROM shipped with the

device.

Summary of Contents for SITRANS MAG 5100W


































































Search results

Summary of Contents for SITRANS MAG 5100W

Reviews:

Siemens SITRANS MAG 5100W, Operating Instructions Manual, Page: 12 / 65

Search results

Summary of Contents for SITRANS MAG 5100W

Reviews: