manualshive.com logo in svg

Siemens SITRANS LG240, Operating Instructions Manual

Share
Download
Siemens SITRANS LG240 Operating Instructions Manual Download Page 67

67

PBD-51041038

SITRANS LG240 - Operating Instructions

44286-EN-171021

10 Dismount

10.1  Dismounting steps

Warning:

Before dismounting, be aware of dangerous process conditions such 

as e.g. pressure in the vessel or pipeline, high temperatures, cor-

rosive or toxic products etc.
Take note of chapters "

Mounting

" and "

Connecting to power supply

" 

and carry out the listed steps in reverse order.

10.2 Disposal

The instrument consists of materials which can be recycled by spe-

cialised recycling companies. We use recyclable materials and have 

designed the electronics to be easily separable.
Correct disposal avoids negative effects on humans and the environ-

ment and ensures recycling of useful raw materials.
Materials: see chapter "

Technical data

"

If you have no way to dispose of the old instrument properly, please 

contact us concerning return and disposal.

WEEE directive 2012/19/EU

This instrument is not subject to the WEEE directive 2012/19/EU and 

the respective national laws. Pass the instrument directly on to a spe-

cialised recycling company and do not use the municipal collecting 

points. These may be used only for privately used products according 

to the WEEE directive.

Summary of Contents for SITRANS LG240

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands