Siemens SITRANS F Series, Operating Instructions Manual, Page: 276 / 362

Modbus communication
A.9 Modbus holding registers tables
SITRANS F Ultrasonic flowmeters FST030 (Modbus)
274
Operating Instructions, 08/2017, A5E37367739-AC
View 2 settings
Table A- 73 View 2 settings
Modbus
register
Data type /
Size in bytes
Parameter Description Default value
[unit]
(unit register)
Value range /
Setting options
Access
level
9013 Unsigned / 2 Enable or disa-
ble
Enable or disable view. 1
• 0: Disabled.
•
1: Enabled.
Read /
write
9008 Unsigned / 2 View Type of appearance. 1
•
1: Single value.
•
2: Active diagnostic
events.
•
3: Three values.
•
4: Totalizer.
•
6: 1 value and bar
graph.
•
7: 1 value and graph.
•
8: Six values.
•
9: Six diagnostic
values.
Read /
write
9021 Unsigned / 2 1
st
value Selection of the first
value.
2 See Selectable values
dependent on the view
type (Page 282).
Read /
write
9022 Unsigned / 2 2
nd
value Selection of the second
value. Depending on
the number of values.
0 See Selectable values
dependent on the view
type (Page 282).
Read /
write
9023 Unsigned / 2 3
rd
value Selection of the third
value. Depending on
the number of values.
3 See Selectable values
dependent on the view
type (Page 282).
Read /
write
9078 Unsigned / 2 4
th
value Selection of the fourth
value. Depending on
the number of values.
1 See Selectable values
dependent on the view
type (Page 282).
Read /
write
9079 Unsigned / 2 5
th
value Selection of the fifth
value. Depending on
the number of values.
11 See Selectable values
dependent on the view
type (Page 282).
Read /
write
9080 Unsigned / 2 6
th
value Selection of the sixth
value. Depending on
the number of values.
12 See Selectable values
dependent on the view
type (Page 282).
Read /
write
8056 Unsigned / 2 Trend scale
mode
Scaling mode for the
graph and totalizer
view.
0
•
0: Automatic scaling.
• 1: Fixed scaling de-
fined by Trend scale
lower limit (8058) and
Trend scale upper
limit (8060).
Read /
write