Siemens Sinumerik 810T User Manual Download Page 191 | Manualshive

Page: 191 / 312

background image

3 Operating Sequences

01.93

3.1.15 Data input/data output

Note:

When programming part programs which are to be loaded block-serially into the NC the
following has to be observed:

– @-commands with return jumps are not allowed in main programs. (Alarm 3012 ”Block not

in memory”).

– Forward jumps in the program are possible, even when the jump address does not yet exist

in the circular buffer. The circular buffer is refilled until the target block has been found.

– Subroutine calls are only possible if these subroutines exist in the part program memory of

the NC or in the UMS.

– @-commands with jumps are possible in the subroutine.
– Part programs stored in the circular buffer cannot be edited.

If you discover a programming error you cannot remedy it with the “Corr. Block” function. If
you try, the alarm “No correction block” appears.

– If you call the “Block transfer” function when an interface is still active, the error message

“Interface busy” appears and the program is not started.

– If the “Block transfer” function is already active and if the second interface is actived from

the PLC, the alarm “RS232C (V.24) abort” appears. However, the program running via the
first interface is still processed.

– If the size of the circular buffer is set to zero and the part program memory is newly

formatted, the alarm “Program memory wrongly formatted” appears.

3.1.16 NC in two languages

The standard operator interface texts are available in two languages. The selected language is
marked in the display "Software version display" with an arrow (>).

You can select the "Software version display" via the softkeys DIAGNOSIS and SW
VERSION. The language selection is made in the machine data.

3-88

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)

«
...
189
190
191
192
193
...
»

Summary of Contents for Sinumerik 810T

























































































































































































































































































































Reviews:

No comments

Related manuals for Sinumerik 810T

Enterprise Filter Authentication R3000

Brand: 8e6 Technologies Pages: 66

S5120V3-EI Series

Brand: H3C Pages: 54

Brand: Ublox Pages: 116

Brand: H3C Pages: 116

Brand: ekwb Pages: 2

eBOX532-100-FL Series

Brand: AXIOMTEK Pages: 2

Brand: ZyXEL Communications Pages: 299

Brand: XtendLan Pages: 228

SmartSwitch 8-slot

Brand: Cabletron Systems Pages: 150

CNPS11X Extreme

Brand: ZALMAN Pages: 12

Brand: Supermicro Pages: 15

Brand: Lattice Semiconductor Pages: 43

ACCULINK 3161 CSU

Brand: Paradyne Pages: 19

Extreme Spirit Il

Brand: Thermaltake Pages: 2

High-Precision AD/DA Board

Brand: Waveshare Pages: 8

Brand: Airlink101 Pages: 64

Brand: ETAS Pages: 29

Brand: ICOP Technology Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands