Siemens SINEMA Remote Connect Page 108 Operating Instructions Manual Download

Page: 108 / 122

Upkeep and maintenance

5.1 Backing up and restoring the system configuration

SINEMA Remote Connect - Server

108

Operating Instructions, 11/2017, C79000-G8976-C383-04

Backing up configurations

Requirement

●

The user has been assigned the right "Create backup copies".

●

The settings for the backup copy are configured.

Procedure
1.

In the navigation panel, select "System > > Backup & restore".

Click the "Create new backup copy" button.

In the dialog that follows, enter a comment on the backup copy.

Click the "Finish" button.

Result
A backup copy (*.backup) with the system settings of the SINEMA RC Server has been

created.

Restoring the configuration

Requirement

●

On the system, the SINEMA RC version is installed with which the backup copy was

created.

Importing the backup
1.

In the navigation panel "System > Backup & restore" select the "Settings" tab.

Enter the same coding key with which the backup was created and save the settings.

Click the "Import backup copy" button.

Click the "Browse" button.

Select the required file in the format *.backup and confirm your selection with the "Open"

button.

Click the "Finish" button. The backup is displayed in the overview.

Click on the "Restore" button to adopt the system configuration of the selected backup

copy.
Click the "Restore" button in the next dialog.

Summary of Contents for SINEMA Remote Connect



























































































































Search results

Summary of Contents for SINEMA Remote Connect

Reviews:

Related manuals for SINEMA Remote Connect

Brands by name

Popular brands

Siemens SINEMA Remote Connect, Operating Instructions Manual

Search results

Summary of Contents for SINEMA Remote Connect

Reviews:

Related manuals for SINEMA Remote Connect

Brands by name

Popular brands