Configuration
58 von 105
SINAUT MD740-1
File 3172AD001_V1_1_060206.doc
File saved
06.02.2006
File printed
06.02.2006
State Freigabe
Autor Pauluhn
Start DHCP Server
Set this switch to
Yes
if you want to enable this function.
Enable dynamic IP address pool
Set this switch to
Yes
if you want to use the IP address pool
selected by DHCP range start and DHCP range end.
Set this switch to
No
if only static assignments based on the
MAC address are to be performed (see below).
Options:
If the DHCP server and the dynamic IP address pool are
enabled you can indicate the network parameters to be used by
the client
DHCP range start:
DHCP range end:
Start and end of the address range from
which the DHCP server of the
SINAUT MD740-1 is to assign IP
addresses to the locally connected
clients.
Local netmask:
Default setting: 255.255.255.0
Default gateway:
Determines which IP address is to be
used as the default gateway by the
client. This is usually the local IP
address of the
SINAUT MD740-1.
DNS server:
Determines from where clients receive
resolution of hostnames in IP addresses.
If the DNS services of the SINAUT
MD740-1 is enabled it can be the local
IP address of the SINAUT MD740-1.
Client MAC address / client IP address
You can establish the MAC address of your client as follows:
Windows 95/98/ME
: Start "winipcfg" in a DOS box
Windows NT/2000/XP
: Start "ipconfig /all" in a prompt. The
MAC address is displayed as a "physical address".
Linux
: Call up "/sbin/ifconfig" or "ip link show" in a shell .
Delete address
Click on
Delete
next to the entry concerned, then
OK
or
Apply.
Add address
If you want to add a new address, click on
New
.
Enter the address data (see below) and click on
OK
or
Apply
.
Enter:
Client MAC address
The MAC address (without spaces or hyphens) of the client.