Configuration
SINAUT MD740-1
19 von 105
File 3172AD001_V1_1_060206.doc
File saved
06.02.2006
File printed
06.02.2006
State Freigabe
Autor Pauluhn
4 Configuration
Remote
configuration
!
Remote configuration is possible only if the SINAUT MD740-1 is
configured for remote access (see page 64). In this case,
proceed exactly as described as from section
Establish
configuration connection
, page 20.
Prerequisites for
local configuration
•
The computer with which you are performing the configuration
must either
-
be connected direct to the Ethernet socket of the
SINAUT MD740-1 via cross-over network cable
-
or it must have direct access via LAN to the
SINAUT MD740-1.
•
The SINAUT MD740-1 must be switched on.
•
The network adapter of the computer with which you are
performing configuration must have the following TCP/IP
configuration:
IP address:
192.168.1.2
Subnet mask:
255.255.255.0
Default gateway:
192.168.1.1
Preferred DNS server:
address of the Domain Name Server
TCP/IP configuration of the network adapter under Windows XP:
1. Click on
Start, Settings, Control Panel, Network
Connections
: right-click on the icon for LAN adapter and click
on
Properties
in the context menu.
TCP/IP
configuration of
the network
adapter
…under
Windows XP
On the
General
tab in
the
Properties of LAN
connection local
network
dialogue box,
select the
Internet
Protocol (TCP/IP)
entry
and then click on the
Properties
button to
make the following
dialogue box appear: