![background image](http://html.mh-extra.com/html/siemens/sinaut-md740-1/sinaut-md740-1_user-manual_379447014.webp)
Putting the device into operation
14 von 105
SINAUT MD740-1
File 3172AD001_V1_1_060206.doc
File saved
06.02.2006
File printed
06.02.2006
State Freigabe
Autor Pauluhn
3.2
Configuring the PIN
In order for the SINAUT MD740-1 to be able to communicate via the GPRS network of
your network operator you must tell the device the PIN (Personal Identification Number)
of the SIM card. Then you can insert the SIM card into the device.
The device also supports SIM cards without a PIN. If your SIM card has no PIN it is not
necessary to configure the PIN. You can then insert the SIM card immediately.
To configure the PIN, proceed as follows:
1. Using your Web browser (e.g. MS Internet Explorer), establish a
configuration connection with the SINAUT MD740-1.
To do this, follow the description in section 4
Configuration
,
page 19 to 23.
2. When the Administrator website of the SINAUT MD740-1
appears, select
Network
#
#
#
#
GPRS
.
In the
PIN
field, enter the PIN of the SIM card that you then
want to insert into the device.
!
Enter the same PIN in both fields.
Then click on
OK
or
Apply
.
Once the PIN is set, the message "Not configured yet" is no
longer displayed.
3. You can close the connection by closing the Web browser.
Enter PIN
(in both fields)