Drive with control via PROFINET
8.7 Adapting the IP and name in the project
Getting Started - SINAMICS Startdrive
Getting Started, 01/2015
55
8.7
Adapting the IP and name in the project
IP address and name
The IP addresses in the project and in the target hardware must match for PROFINET
communication. You have already checked the IP and the name of the target hardware via
Accessible nodes. These must now be entered in the project. Upon download the name in
the target hardware is overwritten by the name from the project and does not therefore have
to be adapted.
How to display the IP address and name
1.
In the "Network view", click the Ethernet port used for the controller. Additional
information is displayed in the "Properties" tab of the inspector window.
