Siemens SINAMICS SL150, Operating Instructions Manual

Page: 42 / 122

Location and display of the indicators
You can find the indicators at the following locations:
● The tilt indicators are located in the upper third of the cabinet.
If the arrow above the line
①
is blued, the tilt indicator has tripped.
● The shock indicators are located at the bottom of the cabinet.
If one or both arrows
②
are black, the shock indicator has tripped.
Figure 4-1 Example of attaching and displaying the shock and tilt indicators
4.3.2 Checking the load handling attachments
Check the load suspension devices before lifting and transporting (such as lifting lugs and
eyebolts) and the lifting gear:
● Inspect the load suspension devices attached to the equipment for possible damage.
Replace load suspension devices if they are damaged.
● Before use, check that the load suspension devices are correctly attached.
● When lifting, use only approved and undamaged lifting gear of sufficient rated capacity.
Check the lifting gear prior to its use.
WARNING
Load suspension devices and lifting gear damaged
If the load suspension devices and lifting gear are damaged or not correctly secured, the
equipment may be dropped during lifting and transportation. This can result in death,
serious injury or material damage.
Inspect the load handling attachments and lifting gear before use.
Preparations for use
4.3 Inspections when receiving the delivery
SINAMICS SL150 6SL38600UL432AA0Z
42
Operating Instructions Rev.201910281433 EXAMPLE