Siemens SINAMICS PERFECT HARMONY GH150, Function Manual

Page: 42 / 136

1. IP, subnet mask and gateway should be in format of xxx.xxx.xxx.xxx. (xxx should not greater
than 255 and smaller than 0.)
2. For a subnet mask to be valid, its binary leftmost bits must be set to 1.(eg. 255.255.255.0)
3. The IP address and the gateway address should range in one subnet.
4. The IP address should not equal to the subnet address or the broadcast address.
The following window will appear in case of an attempt of setting requiring administrator
right under local control mode. Return to the "Home" page shown in Section "Home" screen
(Page 55) to quit the local control mode.
Figure 5-36 Settings limitation while taking local control
The button "Apply settings" will be activated after a successful change of new IP in the input
box. When taping it, a notice window will pop up.
Figure 5-37 Notice
Operator panel configuration
5.5 Setting HMI App
Operator panel for SINAMICS Perfect Harmony GH150 air-cooled MV Converters
40
Function Manual, 12/2022, A5E51241343A