Siemens SINAMICS GL150, Operating Instructions Manual

Page: 47 / 168

● Numeric keypad for the numeric input of parameter values
● 4 LEDs for indicating the operating state of the drive unit:
– RUN: green
– ALARM: yellow
– FAULT: red
– LOCAL/REMOTE: green
● Help function describing causes of and remedies for faults and alarms
● Function keys for prompted navigation through the menus
● Realtime clock for the time stamping of faults and for setting up simple time controls
● LOCAL/REMOTE switchover for selecting the operating location
● Two-stage security concept to protect against unintentional or unauthorized changes to
settings.
● Time and date memory powered by internal battery backup
Functions of the control keys
0(18
Calls the main menu of the AOP30.
Calls the "inhibit functions" menu.
Numeric keys for direct entry of values.
/2&$/
5(027(
Switches between remote and local mode. In local operation, the LED
illuminates.
On/off
If no operator inhibit is activated, then the "On" button in local operation is
always active. The "Off" button is only active in local operation, and in the
factory setting acts as "OFF1".
Counterclockwise-clockwise switchover
The button is only active in local mode.
-2*
JOG (Jogging)
The key is only in effect in local mode in "Ready to switch on" status (not
when "operating"). The system is accelerated to the setpoint speed.
Description
3.4 Closed-loop control
SINAMICS GL150 6SL38555UN113KA0Z
Operating Instructions Rev.201910281450 EXAMPLE
47