Setting parameters with the BOP20
4.2 Displays/indicators and using the BOP20
Basic Operator Panel 20 (BOP20)
24
Operating Instructions, 11/2017, A5E00809375A
Parameter display
The parameters are selected in the BOP20 using the number. To call up the parameter
display from the status display, press the "P" key. You can search for the parameters you
require using the arrow keys. To display the parameter value, press the "P" key again. You
can toggle between the drive objects by pressing the "Fn" keys and the arrow keys
simultaneously. You can toggle between r0000 and the parameter that was last displayed by
pressing the "Fn" key in the parameter display.
Figure 4-2
Parameter display
