Setting parameters with the BOP20
4.2 Displays/indicators and using the BOP20
Basic Operator Panel 20 (BOP20)
Operating Instructions, 11/2017, A5E00809375A
23
4.2
Displays/indicators and using the BOP20
Status display
The status display for each drive object can be set using p0005 and p0006. Using the status
display, you can switch to the parameter display or to a different drive object. The following
functions are supported:
●
Changing the active drive object
–
Press the "Fn" key and "Arrow up" -> the drive object number at the top left flashes.
–
Select the required drive object using the arrow keys.
–
Confirm with the "P" key.
●
Parameter display
–
Press the "P" key.
–
The required parameter can be selected using the arrow keys.
–
Press the "Fn" key -> parameter r0000 is displayed.
–
Press the "P" key -> returns to the status display.
