Siemens SIMOTICS T-1FW3, Configuration Manual

Page: 158 / 354

Technical data and characteristics
6.1 Explanations
1FW3 complete torque motors
156
Configuration Manual, 08/2020, A5E46027705B AA
Winding versions
A number of winding versions (armature circuit versions) for different rated speeds n
N
are
possible within one motor frame size.
Table 6- 1 Code letter for the winding version
Rated speed n
N
[rpm]
Winding version
(10th position in the Article No.)
150 E
250 G
300 H
400 J
500 L
600 M
750 P for SH 150
800 P for SH 200 and SH 280
1200 S
Converter output voltages
The converter output voltages differ according to the converter type and supply voltage.
Table 6- 2 Converter output voltages
Converter type Infeed
module
Supply
voltage
DC link voltage Output voltage
V
line
V
DC link
V
mot
SINAMICS S120
3AC 380 - 480 V
ALM 400 V 600 V 425 V
ALM 480 V 720 V 510 V
SLM 400 V 528 V 380 V
SLM 480 V 634 V 460 V
Torque limit when operating on a SINAMICS S120 with field weakening
The SINAMICS S120 converter injects a field weakening current, which means that the
motor can operate above the voltage limiting characteristic. The method used by the
converter to inject the field weakening current has a significant influence on the curve
characteristic.
The characteristics shown apply to operation on a SINAMICS S120 converter.
Field weakening operation is always active for a SINAMICS S120 converter.
The shape of the characteristics in field weakening mode depends on the position of the
voltage limiting characteristic. Therefore, an appropriate torque-speed characteristic is
assigned in the field-weakening range for each converter output voltage.