Siemens SIMOTICS T-1FW3, Configuration Manual

Page: 5 / 354

1FW3 complete torque motors
Configuration Manual, 08/2020, A5E46027705B AA
3
Introduction
Standard scope
This documentation describes the functionality of the standard scope. The machine
manufacturer documents the supplements and changes made by the machine manufacturer.
For reasons of clarity, this documentation cannot include all of the detailed information on all
of the product types. Further, this documentation cannot take into consideration every
conceivable type of installation, operation and service/maintenance.
This documentation should be kept in a location where it can be easily accessed and made
available to the personnel responsible.
Target group
This documentation addresses project planners and project engineers as well as machine
manufacturers and commissioning engineers.
Benefits
The Configuration Manual enables the target group to apply the rules and guidelines to be
observed when configuring products and systems.
The Configuration Manual supports you with selecting motors, calculating the drive
components, and selecting the required accessories. The Configuration Manual helps the
target group to create a system or plant configuration.
Utilization phase
Planning and configuration phase
Text features
In addition to the notes that you must observe for your own personal safety as well as to
avoid material damage, in this document you will find the following text features:
Operating instructions
Handling instructions with a specified sequence start with the word "Procedure":
The individual handling steps are numbered.
1.
Execute the operating instructions in the specified sequence.
❒
The square indicates the end of the operating instruction.