Preface
ET 200pro Distributed I/O System - Fail-Safe Modules
Operating Instructions, 05/2007, A5E00394073-02
5
Position in the Information Landscape
When working with ET 200pro fail-safe modules and depending on your particular
application, you will need to consult the additional documentation listed below.
References to additional documentation are included in this manual where appropriate.
Documentation
Brief Description of Relevant Contents
ET 200pro Distributed I/O
System
Manual
Describes all generally applicable topics for the ET 200pro hardware (including
configuration, installation, and wiring of ET 200pro)
Safety Engineering in
SIMATIC S7
System
Description
•
Provides an overview of the application, configuration, and method of operation of
S7 Distributed Safety and S7 F/FH Systems fail-safe automation systems
•
Contains a summary of detailed technical information concerning fail-safe engineering
in S7-300 and S7-400
•
Includes monitoring and response time calculations for S7 Distributed Safety and
S7 F/FH Systems fail-safe systems
The following elements are described in the
S7 Distributed Safety Configuring and
Programming
Operating Manual and Online Help:
•
Configuration of the F-CPU and the F-I/O
•
Programming of the F-CPU in F-FBD or F-LAD
For integration in the
S7 Distributed Safety fail-safe
system
Depending on which F-CPU you are using, you will need the following documentation:
•
The
S7-300, CPU 31xC and CPU 31x Operating Instructions: Installation
describes the
assembly and wiring of S7-300 systems.
•
The
CPU 31xC and CPU 31x, Technical Data
Manual describes the standard functions
of the CPU 315-2 DP and PN/DP and the CPU 317-2 DP and PN/DP.
•
The
Automation System S7-400 Hardware and Installation
Installation Manual
describes the assembly and wiring of S7-400 systems.
•
The
Automation System S7-400 CPU Specifications
Reference Manual describes
CPU 416-2.
•
Each applicable F-CPU has its own product information bulletin. These product
information bulletins describe only the deviations from the relevant standard CPUs.
STEP 7
manuals
•
The
Configuring Hardware and Communication Connections with STEP 7 V5.x
Manual
describes the operation of the relevant standard tools of
STEP 7
.
•
The
System Software for S7-300/400 System and Standard Functions
Reference
Manual describes functions for distributed I/O access and diagnostics.
STEP 7
Online Help
•
Describes how to operate the standard tools of
STEP 7
•
Contains information about how to configure and assign parameters for modules and
intelligent slaves with
HW Config
•
Contains a description of the FBD and LAD programming languages
PCS 7
manuals
•
Describe how to operate the
PCS 7
process control system (required when ET 200pro
with fail-safe modules is integrated in a higher-level control system).
The entire SIMATIC S7 documentation is available on CD-ROM.
