Siemens SIMATIC TS Adapter IE Manual Download

Page: 16 / 102

Mounting

4.2 Mounting on Profile Rails

TS Adapter IE

Manual, 11/2010, A5E00977705-03

4.2

Mounting on Profile Rails

Mounting TS Adapter IE

Place the TS Adapter IE on the last slot of the profile rail.
The TS Adapter IE does not require the bus connector used on S7-300 modules.

Attach the TS Adapter IE ❶.

Slide the TS Adapter IE as far as the left side module ❷.

Swivel the TS Adapter IE downward ❸.

76$GDS

WHU,(

Hand-tighten the TS Adapter IE.

76$GDSWHU,

(

Dismounting TS Adapter IE

WARNING

Unplug the connectors from the analog and Ethernet cables of the TS Adapter IE before

dismounting the TS Adapter IE from the grounded profile rail or DIN rail.

Slacken the fixing screw of the TS Adapter IE.

Swivel the TS Adapter IE up ❸.

Summary of Contents for SIMATIC TS Adapter IE







































































































Search results

Summary of Contents for SIMATIC TS Adapter IE

Reviews:

Related manuals for SIMATIC TS Adapter IE

Brands by name

Popular brands

Siemens SIMATIC TS Adapter IE, Manual

Search results

Summary of Contents for SIMATIC TS Adapter IE

Reviews:

Related manuals for SIMATIC TS Adapter IE

Brands by name

Popular brands