Siemens SIMATIC SCALANCE X-300M PoE Compact Operating Instructions Download Page 69

Page: 69 / 74

9.1

Mechanical stability in operation

The switch meets the following requirements for mechanical stability:

IEC 60068-2-6 (vibration)

● Securing on a DIN rail

5 – 9 Hz: 3.5 mm

9 – 150 Hz: 1 g

1 octave/min, 20 sweeps

IEC 60068-2-27 (shock)

● Securing on a DIN rail

15 g, 11 ms duration, 6 shocks per axis

Installation guidelines

The devices meet the requirements if you adhere to the installation and safety instructions

contained in this documentation and in the following documentation when installing and

operating the devices.
● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual (

https://

support.industry.siemens.com/cs/ww/en/view/27069465

)

● "Industrial Ethernet / PROFINET - Passive Network Components" System Manual (

https://

support.industry.siemens.com/cs/ww/en/view/84922825

)

● "EMC Installation Guidelines" configuration manual (

https://support.industry.siemens.com/

cs/ww/en/view/60612658

)

WARNING

Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their target

systems may violate the requirements and regulations for safety and electromagnetic

compatibility.
Only use expansions that are approved for the system.

Note
The test was performed with a device and a connected communications partner that also meets

the requirements of the standards listed above.
When operating the device with a communications partner that does not comply with these

standards, adherence to the corresponding values cannot be guaranteed.

Approvals

9.1 Mechanical stability in operation

SCALANCE X-300M PoE

Compact Operating Instructions, 11/2019, A5E02630810-13

Summary of Contents for SIMATIC SCALANCE X-300M PoE











































































Search results

Summary of Contents for SIMATIC SCALANCE X-300M PoE

Reviews:

Related manuals for SIMATIC SCALANCE X-300M PoE

Brands by name

Popular brands

Siemens SIMATIC SCALANCE X-300M PoE, Compact Operating Instructions

Search results

Summary of Contents for SIMATIC SCALANCE X-300M PoE

Reviews:

Related manuals for SIMATIC SCALANCE X-300M PoE

Brands by name

Popular brands