Siemens SIMATIC SCALANCE X-300M PoE Compact Operating Instructions Download Page 33

Page: 33 / 74

Note
During installation and operation, keep to the installation guidelines and safety notices

described in this document and in the system manuals "Industrial Ethernet / PROFINET

Industrial Ethernet" and "Industrial Ethernet / PROFINET passive network components".
You will find information on the system manuals in the chapter "Introduction", in the section

"Further documentation".

5.2

Installation

Note
When installing and operating the device, keep to the installation instructions and safety-

related notices as described in this document and in the manual "SIMATIC NET Industrial

Ethernet Twisted Pair and Fiber Optic Networks (

https://support.industry.siemens.com/cs/ww/

en/view/1172207

)".

5.3

Installing on an S7-300 standard rail

Procedure

1. Fit the top rear edge of the housing into the S7-300 standard rail.

2. At the bottom, the housing has two holes. Use these holes to screw the housing to the

standard rail.

3. Secure the cable for the power supply and the data and any other cables required (for

example for the signaling contact) according to the descriptions in the section "Connecting

up".

Assembling

5.3 Installing on an S7-300 standard rail

SCALANCE X-300M PoE

Compact Operating Instructions, 11/2019, A5E02630810-13

Summary of Contents for SIMATIC SCALANCE X-300M PoE











































































Search results

Summary of Contents for SIMATIC SCALANCE X-300M PoE

Reviews:

Related manuals for SIMATIC SCALANCE X-300M PoE

Brands by name

Popular brands

Siemens SIMATIC SCALANCE X-300M PoE, Compact Operating Instructions

Search results

Summary of Contents for SIMATIC SCALANCE X-300M PoE

Reviews:

Related manuals for SIMATIC SCALANCE X-300M PoE

Brands by name

Popular brands