Siemens SIMATIC SCALANCE X-300M PoE Compact Operating Instructions Download Page 47 | Manualshive

Page: 47 / 74

background image

6.4

Grounding

Mounting the switch on a DIN rail

The switch is grounded over the DIN rail.

Mounting the switch on an S7 standard rail

The switch is grounded over the screw on the rear of the device.

Mounting the switch on a wall

IE Switches X-300 must be grounded with minimum resistance.
The switch is grounded via the unpainted holes in the housing of the switch and the securing

screws.
If the switch is mounted on a non-conductive base, you will need to use the grounding cable.

The grounding cable is not supplied with the device. Connect the paint-free surface of the

switch to the nearest grounding point using the grounding cable.

6.5

24 VDC signaling contact

24 V DC signaling contact

Note
Supply voltage at signaling contact for XR-300M and XR-300M-PoE
At the signaling contact, there is always a voltage of 24 VDC even if the device can be operated

with 100 to 240 VAC.

● The signaling contact is connected to a 2-pin plug-in terminal block.

The signaling contact can be subjected to a maximum load of 100 mA (safety extra‑low

voltage SELV, 24 V DC).

Connecting

6.5 24 VDC signaling contact

SCALANCE X-300M PoE

Compact Operating Instructions, 11/2019, A5E02630810-13

47

«
...
45
46
47
48
49
...
»

Summary of Contents for SIMATIC SCALANCE X-300M PoE











































































Reviews:

No comments

Related manuals for SIMATIC SCALANCE X-300M PoE

Brand: H3C Pages: 17

Brand: jablotron Pages: 2

Brand: Vector Pages: 3

Brand: 6TL Pages: 25

xStack DGS-3427

Brand: D-Link Pages: 246

S5800-EI Series

Brand: H3C Pages: 61

Brand: rako Pages: 4

Brand: DAITEM Pages: 37

EtherDevice EDS-4009 Series

Brand: Moxa Technologies Pages: 18

Brand: TP-Link Pages: 2

RoamAbout RBT-4102-BG

Brand: Enterasys Pages: 72

UltraHD Switch 3:1

Brand: Oehlbach Pages: 20

tecatlantis EASY LED CONTROL 2 PLUS

Brand: Aquatlantis Pages: 4

Brand: Key Digital Pages: 20

Brand: Radial Engineering Pages: 8

Brand: Racal Instruments Pages: 33

Brand: Videplus Pages: 13

Brand: Wetekom Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands