Siemens SIMATIC PG 720 Manual Download Page 3

Page: 3 / 110

iii

PG 720 Programming Device
C79000-G7076-C720-02

Preface

This manual contains all the information you need for working with the
PG 720 programming device. You can use this information to

unpack the programming device and power it up.

familiarize yourself with the functions and settings of the various
components (display, keyboard, programming facilities etc.).

connect the programming device to other units of equipment
(programmable controllers, other programming devices).

expand your system, provided you comply with the necessary conditions.

analyze and eliminate simple problems.

The following persons require the manual:

Users commissioning the programming device themselves or working
with it (editing, debugging).

System administrators operating the programming device in a network.

Service and maintenance personnel using the PG 720 for system
expansion purposes or error/fault analysis.

This manual describes the version of the PG 720 as available in March 1996.
The Product Bulletin supplied with the PG 720 contains the latest technical
specifications for the programming device.

The approvals, certificates and licenses for your device are supplied along
with the Product Bulletin.

Along with your PG 720, you also receive the following documents which
you require for commissioning the device:

The Product Bulletin with the valid technical data of the PG 720.

A Product Information leaflet about the software supplied with the
PG 720.

For more detailed information about handling the software, please refer to
the appropriate manuals (for example, the STEP 5 manual).

What this Manual
is About

Who is the Manual
Intended For?

Validity of the
Manual

Licences

Where to Find
Information

Summary of Contents for SIMATIC PG 720















































































































Search results

Summary of Contents for SIMATIC PG 720

Reviews:

Related manuals for SIMATIC PG 720

Brands by name

Popular brands

Siemens SIMATIC PG 720, Manual

Search results

Summary of Contents for SIMATIC PG 720

Reviews:

Related manuals for SIMATIC PG 720

Brands by name

Popular brands