Siemens SIMATIC PG 720, Manual

Page: 74 / 110

6
6-8
PG 720 Programming Device
C79000-G7076-C720-02
You save the new settings in the BIOS and exit the SETUP menu using the
“Exit” menu. You can make the following settings.
Phoenix SETUP Utility (Version X.XX)
(c) Phoenix Technologies Ltd. 1985, 1994 All Rights Reserved
Standby Timeout:
Suspend Timeout:
LCD \ CRT Mode:
Maximum CPU Speed:
** Power Management Feature Control **
Page 3 of 3
ESC
Continue
Save
F 5
Default
16 minutes
40 minutes
Always On
Full Speed
Power Management: Disabled
Abort
F 6
** Exiting SETUP **
ESC
F4
F5
F6
Continue with SETUP.
Save values, exit
SETUP, and reboot.
Load default values
for all pages.
Abort SETUP without
saving values.
F 4
Figure 6-4 Main SETUP Menu
When you exit SETUP, you can set the following system parameters:
Table 6-6 Options When Exiting SETUP
Parameter Meaning
ESC Return to SETUP
F4 Save settings and exit SETUP
F5 Use the default settings
F6 Cancel the settings and exit SETUP
Exiting SETUP
System
Parameters
Configuring the Programming Device