manualshive.com logo in svg

Siemens SIMATIC PC 847B, Operating Instructions Manual

The Siemens SIMATIC PC 847B comes with a comprehensive Operating Instructions Manual that users can download for free from our website. This manual provides detailed guidance and step-by-step instructions for a hassle-free setup and operation. Download the manual now at manualshive.com for a smooth and convenient experience.

Share
Download
background image

Detailed descriptions 

 

16.5 BIOS Setup 

 

SIMATIC Rack PC 847B 

166

 

Operating Instructions, 06/2008, A5E02203168-01 

IDE Channel 0 Master, IDE Channel 0 Slave 

The system jumps to the following submenu when you select this type of menu field: 

 

Figure 16-5  IDE Channel 0 Master (example) 

 

[User] 

Select “User” to enter a user-specific definition of the hard disk 

type. Configure all the other options, for example, Cylinder, Heads, 

Sectors/Track, or other properties of the hard disk drive. 

 [Auto] 

The parameters which you can select in this dialog are usually 

saved to the respective IDE drive. The "Auto" setting in the "Type" 

field means that these values are automatically read from the drive 

and written to memory. 
If Type is selected for a drive that does not exist, a timeout is 

triggered within approximately 1 minute and the entries remain 

unchanged. It makes sense only to set "Auto" for interfaces to 

which a drive is connected. 

[CD/DVD-ROM]  CD/DVD-ROM is connected 
ATAPI 

Removable 

A removable data volume is connected 

Type 

None 

Select "None" if you have not connected a disk drive. This setting 

reduces system waiting time. 

The number of blocks (sectors) transferred per interrupt are defined at the "Multi-

Sector Transfer" option. The value depends on the drive and should only be set by 

way of "Auto" setting at the "Type" field. 

Multi-Sector 

Transfer 

Disabled 

2, 4, 8, 16 sectors 

Summary of Contents for SIMATIC PC 847B









































































































































































































































Reviews:

No comments

Related manuals for SIMATIC PC 847B

TBM TB1301 Instruction Manual preview
TB1301
Brand: TBM Pages: 22
Belimo LonWorks LMX24-LON Quick Start Manual preview
LonWorks LMX24-LON
Brand: Belimo Pages: 4
Tesmec AFB506 Handbook preview
AFB506
Brand: Tesmec Pages: 154
VALSTEAM ADCA FLT17 Installation And Maintenance Instructions preview
FLT17
Brand: VALSTEAM ADCA Pages: 5
Qimarox HR9 User Manual preview
HR9
Brand: Qimarox Pages: 35
H. Winter TIMBERMAX 4-23 ECO Operation Manual preview
TIMBERMAX 4-23 ECO
Brand: H. Winter Pages: 54
R.V.R. Elettronica TELINK-SNMP2 User Manual preview
TELINK-SNMP2
Brand: R.V.R. Elettronica Pages: 38
Murata GQM2195C2E4R7BB12 Series Reference Sheet preview
GQM2195C2E4R7BB12 Series
Brand: Murata Pages: 25
ABB REM 543 Technical Reference Manual preview
REM 543
Brand: ABB Pages: 68
RINGSPANN DH 012 FEM Installation And Operating Instructions Manual preview
DH 012 FEM
Brand: RINGSPANN Pages: 16
NetterVibration NTP 18 Operating Instructions Manual preview
NTP 18
Brand: NetterVibration Pages: 21
V.ORLANDI E 50 Installation, Operating And Maintenance Instructions preview
E 50
Brand: V.ORLANDI Pages: 128
Kval EFX Service Manual preview
EFX
Brand: Kval Pages: 108
Kval MDA-6 Operation & Service Manual preview
MDA-6
Brand: Kval Pages: 60
Kval 990FX Operation Manual preview
990FX
Brand: Kval Pages: 96
Acer Wood Runner Manual preview
Wood Runner
Brand: Acer Pages: 94
Acer DYNAMIC 21120GH Operation Manual preview
DYNAMIC 21120GH
Brand: Acer Pages: 80
MBM FC 10 PLUS Service Manual preview
FC 10 PLUS
Brand: MBM Pages: 74

Brands by name

Popular brands

Load more brands