manualshive.com logo in svg

Siemens SIMATIC PC 847B, Operating Instructions Manual

The Siemens SIMATIC PC 847B comes with a comprehensive Operating Instructions Manual that users can download for free from our website. This manual provides detailed guidance and step-by-step instructions for a hassle-free setup and operation. Download the manual now at manualshive.com for a smooth and convenient experience.

Share
Download
background image

Technical data 

 

14.1 General specifications 

 

SIMATIC Rack PC 847B 

116

 

Operating Instructions, 06/2008, A5E02203168-01 

General specifications 

 

Drives (for configuration details, refer to the order documentation)  
Floppy drive 

3.5" (1.44 MB) 

HDD 

3.5" SATA 300, 80 / 160 GB 

DVD ROM 

5.25" ATAPI, UDMA33 
Read:  

DVD ROM: Single layer 16x, Dual Layer 8x 

DVD+R/RW, DVD-R/RW 8x, DVD-RAM 2x 

CD-ROM, CD-R 32x, CD-RW 20x 

DVD burner 

5.25" ATAPI, UDMA33 
Read: 

DVD ROM: Single Layer 16x, Dual Layer 12x 

DVD-R/+R: Single Layer 16x, Dual Layer 7x 

DVD-RW/+RW 13x  

CD-ROM/CD-R Read 48x, CD-RW 40x 
Write 

DVD+R 16x, DVD+RW 8x, DVD-R 16x, DVD-RW 6x 

DVD+R9 (DL) 8x, DVD-R DL 6x 

CD-R 48x, CD-RW 32x 

Chipset 
Chipset 

Intel 945 GM 

RAM 

Max. 4 GB SDRAM DDR2 (PC 5300), unbuffered, no ECC 

USB 

Max. 6 USB 2.0 devices (500 mA high current, high speed up 

to 480 Mbps) 

Max. accumulated power consumption of all USB devices:  

2.3 A. 

PCI/PCIe 

PCI V2.3, PCIe V1.0a 

SATA 

4x SATA 150/300, with optional RAID 

ATA 

Max. 2 ATA 100 drives 

Graphics 
Graphics controller 

Intel® GMA950 Graphics Controller, 

2-D and 3-D engine integrated in chipset 

Graphics memory 

Dynamic Video Memory Technology 

(uses up to 128 MB of RAM) 

Resolutions/frequencies/colors 

CRT: 

up to 1280x1024 at 100 Hz / 32-bit color depth 

up to 1600x1200 at 60 Hz / 32-bit color depth 

Maximum resolution: 2048x1536 at 75 Hz 
LCD via DVI: 

expansion module (Add2 card) in the PCIe x16 Slot (optional)

up to 1600x1200 at 60 Hz / 32-bit color depth 

Graphics module (optional) 

PCIe x16 graphics card, dual head (2x VGA or 2x DVI-D) 

Type: NVIDIA Quadro NVS 285 (128 MB graphics memory) 

up to 2048 x 1536 at 75 Hz / 32-bit color depth 

Summary of Contents for SIMATIC PC 847B









































































































































































































































Reviews:

No comments

Related manuals for SIMATIC PC 847B

Daikin VAM250FC Operation Manual preview
VAM250FC
Brand: Daikin Pages: 12
Napoleon RSE625RSIB Quick Assembly Manual preview
RSE625RSIB
Brand: Napoleon Pages: 3
Daikin LREN8A7Y1B Installation And Operation Manual preview
LREN8A7Y1B
Brand: Daikin Pages: 52
Eaton EASY-COM-SWD Series Instruction Leaflet preview
EASY-COM-SWD Series
Brand: Eaton Pages: 4
Skymsen SFL-282HD Instruction Manual preview
SFL-282HD
Brand: Skymsen Pages: 24
Rapid AB-Z Operation Manual preview
AB-Z
Brand: Rapid Pages: 12
Watts SOLCA BA 4760 Installation Manual preview
SOLCA BA 4760
Brand: Watts Pages: 72
R.V.R. Elettronica HC4 User Manual preview
HC4
Brand: R.V.R. Elettronica Pages: 72
Nibe ClimateMaster Tranquility 22 Digital TZ Series Installation, Operation & Maintenance Instructions Manual preview
ClimateMaster Tranquility 22 Digital TZ Series
Brand: Nibe Pages: 72
FLENDER BCC Operating Instructions Manual preview
BCC
Brand: FLENDER Pages: 66
Eaton HMH36 User Manual preview
HMH36
Brand: Eaton Pages: 12
BIRD TERMALINE 8251 Series Operation Manual preview
TERMALINE 8251 Series
Brand: BIRD Pages: 24
YZ Systems NJEX ZEO 6400 Instructions & Operating Manual preview
NJEX ZEO 6400
Brand: YZ Systems Pages: 106
Dixon BAYCO BC Series Maintenance Instructions Manual preview
BAYCO BC Series
Brand: Dixon Pages: 21
Hamamatsu Photonics C9266-03 Instruction Manual preview
C9266-03
Brand: Hamamatsu Photonics Pages: 37
Commell CMB-B72 Installation Manual preview
CMB-B72
Brand: Commell Pages: 33
GRAVEDA GRASPRESSO GP50-15 Instruction Manual preview
GRASPRESSO GP50-15
Brand: GRAVEDA Pages: 32
ASCO Numatics 450 Installation And Maintenance Instructions Manual preview
450
Brand: ASCO Numatics Pages: 10

Brands by name

Popular brands

Load more brands