Planning use
3.3 Make note of identification data
SIMATIC Panel PC 577
3-4
Operating Instructions, Release 04/2006, A5E00798484-01
3.3
3.3
Make note of identification data
Procedure
1.
Write down the Microsoft Windows product key of the Certificate of Authenticity COA in
the table at the end of this section. The product key can be found on the back of the
device. You will need the product key during the reinstallation of the operating system.
2.
Write down the manufacturer's number SVP and the order number , e.g. "6AV782...", in
the table. If repairs are necessary, the device can be identified by the service center on
the basis of the SVP number and order number.
Both numbers can be found on the rating plate attached to the side of the device where
the power unit is located.
Figure 3-1
Rating plate
3.
Enter the Ethernet address of the device: The Ethernet address is located in the "Main"
menu of the BIOS setup, "Hardware Options > Ethernet Address."
Identification
Number
1
Microsoft Windows Product Key
2
SVP number
3
Order number
10
Ethernet address (MAC address)
