Modules
4.3 Installing/Removing Power Modules
Installing a Power Module
To install a power module, do the following:
1. If equipped, remove the existing module.
2. Insert the module into the empty slot.
2
3
1
1
Screws
2
Power Supply
3
Chassis
Figure 4.6
Installing a Power Module
3. Hand-tighten the screws to secure the power module to the chassis.
4. Turn on power to the device and confirm the module is receiving and supplying
power. This is indicated by the LEDs on the module.
LED
State
Description
O
Green
The module is supplying power
I
Green
The module is receiving power
RUGGEDCOM RSG2488F
Installation Manual, 11/2019, C79000-G8976-1351-05
35
