Device Management
3.3 Inserting/Removing the MicroSD Card
• Do not expose the microSD card to large magnetic or static electric fields
• Do not bend or drop the microSD card
CAUTION
Security hazard – risk of unauthorized access and/or exploitation
Make sure to remove the microSD card before decommissioning the device or send-
ing the device to a third-party.
To insert or remove a microSD card, do the following:
1. Power down the device.
2. Unscrew the retention screws and remove the access plate.
2
1
1
Access Plate
2
MicroSD Card
Figure 3.3
Inserting/Removing a MicroSD Card
3. Without touching the contacts on the card, insert or remove the microSD card.
4. Install the access plate and finger-tighten the retention screws.
5. Power up the device.
RUGGEDCOM RSG2488F
Installation Manual, 11/2019, C79000-G8976-1351-05
21
