Module Replacement
2.2.1 Removing the Cover
3. Remove the desired module.
For more information, refer to
.
2.2.1
Removing the Cover
To remove the cover from the device, do the following:
1. Turn off power to the device.
2. Disconnect all cables from the device.
3. Carefully flip the device over to expose the screws on the bottom of the chassis.
4. Remove the three Torx screws indicated.
Figure 2.1
Removing the Bottom Screws
5. Carefully flip the device right-side up.
8
RUGGEDCOM RSG2100
Service Manual, 07/2019, C79000-G8976-1151
