Installing the Device
2.5.2 Connecting Low DC Power
2.5.2
Connecting Low DC Power
To connect a low DC power supply to the device, do the following:
1. Connect the positive wire from the power source to the positive terminal on the
terminal block.
1
3
2
4
1
Positive Terminal
2
Negative Terminal
3
Surge Ground Terminal
4
Braided Ground Cable
Figure 2.6
Terminal Block Wiring - Single DC Power Supply Inputs
16
RUGGEDCOM RS940GF
Installation Manual, 01/2021, C79000-G8976-1356-04
