Introduction
1.3 Required Tools and Materials
POWER LED
Illuminates when power is being supplied to the device.
ALARM LED
Illuminates when an alarm condition exists.
Port Status LEDs
Indicate the status of the optional SFP ports:
State
Description
Solid
Link
Blinking
Activity
Off
No link/activity
Status LEDs for copper Ethernet ports are incorporated into each
RJ45 port. For more information, refer to
.
Power Supply Terminal Block
A pluggable terminal block. For more information, refer to:
•
•
"Power Supply Specifications (Page 25)"
RS-232 Serial Console Port
The serial console port is for interfacing directly with the device
and accessing initial management functions. For information
about connecting to the device via the serial console port, refer to
"Connecting to the Device (Page 19)"
.
Failsafe Alarm Relay
Latches to default state when a power disruption or other alarm
condition occurs. For more information, refer to:
•
"Connecting the Failsafe Alarm Relay (Page 12)"
•
"Failsafe Alarm Relay Specifications (Page 25)"
1.3
Required Tools and Materials
The following tools and materials are required to install the RUGGEDCOM RS940GF:
Tools/Materials
Purpose
AC or DC power cord (16 AWG)
For connecting power to the device.
CAT-5 Ethernet cables
For connecting the device to the network.
Flathead screwdriver
For mounting the device to a DIN rail.
Phillips screwdriver
For mounting the device to a panel.
4 x #6-32 screws
For mounting the device to a panel.
1.4
Decommissioning and Disposal
Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated
Configuration Manual
.
RUGGEDCOM RS940GF
Installation Manual, 01/2021, C79000-G8976-1356-04
3
