Siemens SIMATIC NET RUGGEDCOM RS930W Installation Manual Download Page 11 | Manualshive

Page: 11 / 52

background image

Introduction
1.1 Feature Highlights

1.1

Feature Highlights

Ethernet Ports

• 6 x 10/100Base-TX copper Ethernet ports

Ethernet Over VDSL (EoVDSL)

• 1 x Ethernet over VDSL (EoVDSL) ports
• Automatically selects fastest data rate based on distance and quality of cable
• Software selectable to be master or slave
• Frequency Division Multiplexing (FDM)

Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges
• Hazardous Location Certification: Class I Division 2
• -40 to 85 °C (-40 to 185 °F) ambient operating temperature (no fans)
• 20 AWG Galvanized Steel
• DIN or panel mounting options provide secure mechanical reliability
• [Optional] Conformal coated printed circuit boards

Universal Power Supply Options

• Fully integrated power supply
• Universal high-voltage range:

• 125-250 VDC or 100-240 VAC (Hazardous Environments)
• 88-300 VDC or 85-264 VAC (Non-Hazardous Environments)

• Dual low-voltage DC inputs: 24 or 48 VDC
• Terminal blocks for reliable maintenance free connections
• CSA/UL 60950-1 safety approved to 85 °C (185 °F)

1.2

Description

The RUGGEDCOM RS930W features various ports, controls and indicator LEDs on the

front panel for connecting, configuring and troubleshooting the device.

2

RUGGEDCOM RS930W

Installation Manual, 02/2020, C79000-G8976-1035-07

«
...
9
10
11
12
13
...
»

Summary of Contents for SIMATIC NET RUGGEDCOM RS930W





















































Reviews:

No comments

Related manuals for SIMATIC NET RUGGEDCOM RS930W

SANbox 5600 Series

Brand: Qlogic Pages: 408

Brand: Paugge Pages: 20

Brand: Key Digital Pages: 31

Brand: Fairchild Pages: 20

Brand: Accton Technology Pages: 7

Brand: Taiden Pages: 21

Brand: Lionel Pages: 8

ADDERView Secure AVS-4128

Brand: ADDER Pages: 24

Brand: SLV Pages: 22

Brand: Edge-Core Pages: 15

Brand: MiLAN Pages: 12

Brand: Allied Telesis Pages: 44

Brand: Blue Sea Systems Pages: 2

EZ HUB 10/100 5608DS

Brand: SMC Networks Pages: 2

Brand: Ocean Matrix Pages: 6

Brand: Kramer Pages: 8

Brand: Led Control Pages: 22

Brand: Alloy Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands