Installation Instructions PG-5412/MS-DOS, Windows
32
Installation Instructions PG-5412/MS-DOS, Windows
S79200-A0735-X-03-7419
2.2 Installation
Notes
Screen Saver
If you use a screen saver, remember that processing the saver costs
CPU time and this can lead to the system being overloaded. There are
screen savers that are known to continue occupying parts of memory.
This leads to a continuous reduction in the usable memory.
Virus Scanner
Using a virus scanner during operation can cause problems with
hardware expansions.
It is recommended that you do not run virus tests while PG-5412/MS-
DOS, Windows is active. After a virus test, you should reset your
computer before you activate an interface to the process.
Important Note
about Installation
Before you install this product, please make sure that no other
application has been started that uses existing SIMATIC NET
components.
If software components that would normally be replaced during
installation of this product are already in use, they are retained
and not replaced without any error message being displayed.
This means that the installation is incomplete and you may
encounter problems later during operation.
Installation on the
Same Drive
If you have already installed a SINEC or SIMATIC NET product,
you should always install the new product on the same drive!
☞
☞
