Siemens SIMATIC NET CP 443-1 Advanced Manual Download Page 52

Page: 52 / 126

LEDs

CP 443-1 Advanced (GX30)

Manual, 03/2019, C79000-G8976-C256-05

CP communications status / LED display patterns

LED

Display

Meaning

TXD (green)

CP sending over Ethernet.
Note:
Sending over PROFINET IO is not signaled here.

RXD (green)

CP is receiving over Ethernet.
Note:
Receiving over PROFINET IO is not signaled here.

X1P1
X2P1 / X2P2 /

X2P3 / X2P4
(green / yellow)

Port has no connection over Ethernet.

Existing connection over port to Ethernet (LINK status).

LED flashes yellow (constant light green): Port sending / re-

ceiving over Ethernet or PROFINET IO.
Note:

All received / sent frames are signaled for each specific port

including those simply forwarded by the switch.

Continuous data transfer at the port over Ethernet (on

PROFINET ports, for example PROFINET IO).

Table 4- 2

Legend

Symbol

Meaning

OFF

Flashing

any

Module identification with flashing LED (PROFINET interface)

With the help of Web diagnostics or the online functions of STEP 7, you can search for and

identify the module in the rack. The options for this are as follows:
If you click the "Identify" or "Flash" buttons, all the port LEDs of the PROFINET interface

flash briefly.

●

In Web diagnostics
You click the "Flash" button in the update center.

●

In STEP 7
You click the "Flash" button in the "Browse network" dialog.

Summary of Contents for SIMATIC NET CP 443-1 Advanced































































































































Search results

Summary of Contents for SIMATIC NET CP 443-1 Advanced

Reviews:

Related manuals for SIMATIC NET CP 443-1 Advanced

Brands by name

Popular brands

Siemens SIMATIC NET CP 443-1 Advanced, Manual

Search results

Summary of Contents for SIMATIC NET CP 443-1 Advanced

Reviews:

Related manuals for SIMATIC NET CP 443-1 Advanced

Brands by name

Popular brands