Siemens SIMATIC NET CP 1604 Operating Instructions Manual Download Page 37

Page: 37 / 92

Operating hardware

4.1 Diagnostics with SNMP

CP 1604 / CP 1616
Operating Instructions, 02/2017, C70000-G8976-C218-08

OPC server (

http://www.automation.siemens.com/mcms/industrial-

communication/de/ie/software/netzwerkmanagement/snmp-opc-server/seiten/snmp-opc-

server.aspx

)

Note
The SIMATIC NET SNMP OPC server is not part of this product.

Profile files and MIB compilers

The range of information that can be monitored by the devices with the SIMATIC NET SNMP

OPC server depends on the particular device profile.
With the integrated MIB compiler of STEP 7/NCM PC, existing profiles can be modified and

new device profiles created for any SNMP-compliant device. It requires MIB files according

to the SMIv1 standard.
The SMIv1 MIB of the CP and a complete device profile are available on the supplied

product CD or can be downloaded from Support:
MIB (

http://support.automation.siemens.com/WW/view/en/22414405

)

4.1.3

Variables of the MIB-II standard

Variables in the "System" directory

The following table shows several SNMP variables of the MIB II standard for monitoring the

device standard from the "System" directory:

Variables

Access rights

Description

sysDescr

Read only

Contains a vendor-specific identification of the device, for example "SIEMENS",

"SIMATIC NET", "CP 1616" or "CP 1604".
A string with up to 255 characters is used.
Data type: DisplayString

sysObjectID

Read only

Address (OID - Object Identifier) at which the device-specific SNMP variables

are accessible. On the CP 1616/CP 1604, the OID is:
1.3.6.1.4.1.4196.1.1.9.1 for CP 1616
1.3.6.1.4.1.4196.1.1.9.2 for CP 1604

sysUpTime

Read only

Time since the last reset, for example since power-up – This information is in

multiples of hundredths of seconds.

sysContact

Read and write

Here, you can enter the name of a contact person; factory default: empty string.
The possible value is string with a maximum of 255 characters.

sysName

Read and write

Name for the device; factory default: empty string
The possible value is string with a maximum of 255 characters.

Summary of Contents for SIMATIC NET CP 1604





























































































Search results

Summary of Contents for SIMATIC NET CP 1604

Reviews:

Related manuals for SIMATIC NET CP 1604

Brands by name

Popular brands

Siemens SIMATIC NET CP 1604, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC NET CP 1604

Reviews:

Related manuals for SIMATIC NET CP 1604

Brands by name

Popular brands