Siemens SIMATIC HMI TP 070, Equipment Manual

Page: 72 / 80

SIMATIC HMI Documentation
D-4
TP 070 Equipment Manual
Release 03/00
Content Target Group Documentation
Communication
User’s Guide
Programmers Provides information on connecting text-based and
graphics displays to the following PLCs:
SIMATIC S5
SIMATIC S7
SIMATIC 500/505
drivers for other PLCs
This documentation describes the
configuration and parameters required for
connecting the devices to the PLC and the network
user data areas used for exchanging data between
operating unit and PLC.
Communication for
Windows-based Systems
User’s Guide
Programmers Provides information on connecting Windows-based
systems to the following PLCs:
SIMATIC S5
SIMATIC S7
SIMATIC 505
OPC
Allen Bradley PLC-5/SLC 500
Mitsubishi FX
Telemecanique TSX
This documentation describes the
configuration and parameters required for
connecting the devices to the PLC and the network
user data areas used for exchanging data between
operating unit and PLC.
Other PLCs
Online Help
Programmers Provides information on connecting devices to PLCs,
such as:
OPC
Mitsubishi
Allen Bradley
Telemecanique
Modicon
Omron
SIMATIC WinAC
When the drives are installed, the relevant Online Help
is installed at the same time.
ProAgent for OP
User’s Guide
Configurers Provides the following information about the ProAgent
optional package (process diagnosis) for OPs
configuring system-specific process diagnosis
detecting, locating the cause of and eliminating
process errors,
customizing standard diagnostic screens supplied
with the software.